‧AC‧MK254GAN (HR)
Dia.219x87mm / 8.5inch
1000~370 CFM
Metal Impeller, Reverse Airflow
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
MK254GAN11-1** 115 100~120 50/60 95/105 2800/3200 830/1000 23.5/28.3 0.78/0.60 19.81/15.24 70 2/1 £
MK254GAN11-2** 115 100~120 50/60 55/65 2300/2200 660/620 18.7/17.6 0.33/0.27 8.38/6.86 63 4/3 £
MK254GAN11-3** 115 100~120 50/60 32/40 1400/1600 415/500 11.8/14.2 0.25/0.20 6.35/5.08 46 6/5 £
MK254GAN11-4** 115 100~120 50/60 24/33 1200/1100 420/370 11.9/10.5 0.18/0.14 4.57/3.56 34 8/7 £
MK254GAN11-1/2**
Dual speed 		115 100~120 50/60 95/105
55/65 		2800/3200
2300/2200 		830/1000
660/620 		23.5/28.3
18.7/17.6 		0.78/0.60
0.33/0.27 		19.81/15.24
8.38/6.86 		70
63 		2/1
4/3 		£
MK254GAN11-3/4**
Dual speed 		115 100~120 50/60 32/40
24/33 		1600/1500
1200/1100 		560/500
420/370 		15.9/14.2
11.9/10.5 		0.25/0.20
0.18/0.14 		6.35/5.08
4.57/3.56 		46
34 		6/5
8/7 		£
MK254GAN22-1** 230 200~240 50/60 95/105 2800/3200 830/1000 23.5/28.3 0.78/0.60 19.81/15.24 70 2/1 £
MK254GAN22-2** 230 200~240 50/60 55/65 2300/2200 660/620 18.7/17.6 0.33/0.27 8.38/6.86 63 4/3 £
MK254GAN22-3** 230 200~240 50/60 32/40 1400/1600 415/500 11.8/14.2 0.25/0.20 6.35/5.08 46 6/5 £
MK254GAN22-1/2**
Dual speed 		230 200~240 50/60 95/105
55/65 		2800/3200
2300/2200 		830/1000
660/620 		23.5/28.3
18.7/17.6 		0.78/0.60
0.33/0.27 		19.81/15.24
8.38/6.86 		70
63 		2/1
4/3 		£
MK254GAN22-3/4**
Dual speed 		230 200~240 50/60 32/40
24/33 		1600/1500
1200/1100 		560/500
420/370 		15.9/14.2
11.9/10.5 		0.25/0.20
0.18/0.14 		6.35/5.08
4.57/3.56 		46
34 		6/5
8/7 		£
  • The stated airflow, air pressure, noise levels are measured with housing orifice dia.: impeller Φ +1~1.5mm, at distance: approx. height of impeller + motor frame. The optimal operating data can only be depended on the installation conditions.
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Capacitor induction, 2 or 4 pole
      Burnout Protection: Thermal protector
      IP Protection: IP56
      Frame: Aluminum die cast, black cosmetics. Natural or any colors available
      Impeller: Steel-sheet metal fan blades, integrantly spot welded onto rotor
      Bearing: System: Two high precision permanently lubricated ball bearings
      Rotation: CCW seen on rotor
      Connection: Wire lead
      Weight: 1,900g (4.2Lbs)
      Dielectric Strength: Over 1 minute at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output:
      Operating Temp: Ambient non-condensing -30~+80C
      Storage Temp: -40C~+100C (at 65%RH)
      Life Expectancy: 50K hours at 55C